Sanyo 165w High Replacement Plv-z60 Plv-z5 Projector Plv-z5bk 6103235998 Lamp Quality Shea Gustie Rating: 4.2 out of 5
Our advantage:
1,We guarantee that all LUMENS compatible lamps are installed with ORIGINAL BURNERSinside, so it will have best performance.
2,At the same time, we have 6 months warranty for lamps. We have sold a lot of projector lamps to our clents from all over the world with good reputation.
About discount:
Dear friend, if you buy the product again in our store after the 3 months of the first order, you could contact us, we will give you a 15% discount. This discount is only for the old customers.
About Projector lamp:
Lamp model: 610 323 5998, POA-LMP94Power: HS165KR10-6E (165W)
Working life: approx. 2000- 3000hrs
Used for Sanyo: PLV-Z5, PLV-Z4, PLV-Z60. etc
Lamp type: 100% new Compatible bulb with Original burner inside
Delivery: 1-2 working days
Warranty: 180 days
Maintain the lamp life：1. Switching power supply attention order.
Normally, when we turn on the projector, you should turn on the power first, and then press and hold the LAMP indicator in the projectors control panel until the green light does not blink. Shutdown can not directly cut off the power, but should first hold down the LAMP indicator until the green light does not flash, the projector cooling fan stops rotating, and finally cut off the power. So the right switch the projectors power supply on the life of the lamp and the projectors internal parts of the life of a great impact.
2. The switching interval should be around 5 minutes.
Because the projectors power supply using a proportional pulse width modulation method of the mains buck and voltage regulator, steady power processing, and in dealing with these links, the projector power supply using the power switch and the transformer will work in the higher Of the frequency, the switch in the frequent switching process will naturally appear a considerable loss of the switch, these losses will be transferred into the heat emitted out, so that the temperature inside the projector, plus the light bulb itself issued Heat gathered in the projector inside the small space, it will be easy to make the bulb explosion phenomenon. In addition, frequent switching power supply, but also on the projection lamp to produce a great impact on the current, the projection lamp will be very easy to damage. In order to avoid damage to these bulbs, we try not to switch the projector frequently, but also remember that after turning off the projector if you want to reboot, you must wait patient for about 5 minutes.
3. Do not work for more than four hours each time.
If the projector lamp for a long time to work, the projectors internal imaging system may emit a lot of heat, these heat will lead to the projector inside the rapid increase in temperature, because the projector lamp wall quartz under high temperature conditions will produce devitrification Phenomenon, resulting in white spots, so a lot of resistance to stop the light penetration, so that the local area of the abnormal temperature rise, and thus cause further expansion of the devitrified area, so that the brightness of the rapid decline, and is likely to lead to bulb explosion. Therefore, as far as possible we must pay attention to let the projector every time the work can not last more than four hours.
Package details:
Strengthen the package to prevent damage to the product during transport, please dont worry.
We will ship it within 1-2 workdays after we received the order . Aliexpress : It will need customs charge , it depends on customs of your countryE-packet: It need longer time , and the tracking imformation will have belated. To Russian : Your full name is needed . including first name+middle name+last name , DHL ,UPS ,FEDEX ,TNT are not available for Russian , if you want fast delivery please choose E-EMS . To Brail : Please kindly tell us your CPF NO, of you choose DHL,UPS,TNT,FEDEX .For any reasons return the product ,please contact us in your first time before you put the dispute or give us a negatie feedback . Merchandise which is damaged or missing component is not refundableBuyer should take shipping fee when the following reasons of returning happaned, 1. Customers bought what they are not suppose to buy or do not like it (non-quality problems) 2. The goods is already out of guarantee expiration, which is 180 days from buyer get the lamp.Return Policy
If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
Seller Service
On-time Delivery: If you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).Sanyo 165w High Replacement Plv-z60 Plv-z5 Projector Plv-z5bk 6103235998 Lamp Quality
No comments:
Post a Comment